How to find out the monitor hertz

Each display (monitor) can not do without such a characteristic as gertzovka. Otherwise, it is called the screen refresh rate. This is an extremely important technical indicator that everyone should know about. It is this indicator that can demonstrate how quickly the "picture" on the screen is updated. This is especially important for gamers. How many hertz is in a monitor or laptop is one of the first things they pay attention to.

For what purposes is hertzov especially important?

This indicator is important both during computer games, and while surfing the Internet or when developing software. It is difficult to find a more suitable technical indicator that would allow us to judge the quality of the monitor. With it, you can easily do a variety of work tasks or even entertainment.

In some cases, it is fundamentally important to know about Hertzovka when it comes to working with graphics. Every serious graphic designer needs to know exactly what dumpling his monitor and computer have. Only in this case, you can be sure that the capabilities of the screen will be enough to solve typical work tasks.

Hertzovka is the most important parameter for monitors that are designed to watch three-dimensional films or games. In this case, you need to buy screens that have at least 120Hz. If the monitor does not support, the picture will slow down, and watching a movie will become much less comfortable. It is not surprising that many buyers pay close attention to this parameter, because three-dimensional technologies are developing rapidly, so users increasingly want to watch movies in a new format.

IMPORTANT! When buying, you need to know where to look and check the laptop Hertz.

Hertzovka screen depends on for what purpose it was created. If the monitor is designed for computer games, then in this case, the indicator should be at least 90 Hz. However, on most screens, the refresh rate rarely exceeds 70Hz. This is due to the fact that most modern computers are not designed for computer games. They are used to solve everyday problems that are in no way connected with the quick change of frames on the screen.

Also on the market are monitors that can boast a screen refresh rate of 120 Hz. Such screens can be recommended to fans of three-dimensional technologies. They can already understand in the store which monitor is right for them. It is not surprising that such monitors need such a gertzovka.

REFERENCE! The thing is that three-dimensional technologies create an excessive load, so it is not surprising that in most cases this indicator of the screen refresh rate is required.

It is believed that the smallest possible smoothness frequency reaches approximately 15 frames per second. This is quite enough to make the image look smooth and in no case flicker. It is worth noting that this information was established experimentally at the very dawn of the creation of cinema.

It is easy to learn dumpling in the most popular versions of the OS. To do this, go to the Start menu, and then find the Advanced Display Settings menu. It is located in the options tab. Those who would like to get more accurate information about the dimming of their monitor should turn to third-party programs. In this case, you can be sure that the information will be much more accurate and competent.

On the Internet, you can find many programs designed to test this parameter, which are not very different from each other. That is why it is recommended to choose the one whose interface seems the simplest and most understandable. In this case, using this program will be much more pleasant.

In order to accelerate the computer and make it more productive, it takes a lot of effort. Most often, users try to disperse it. What needs to be done to disperse the computer? Why is it needed and what threats can await inexperienced users?

The thing is that most often computer overclocking is required in order to improve gaming performance. Even a very mediocre PC can “pull” the latest gaming innovations if the user manages to disperse it. This is a great option both for those who are poorly versed in computer hardware and for experienced users.

The only threat that awaits those who try to do this is the likelihood of a PC crashing. This will be possible if the user accelerates his own computer too much. Then the important components inside can burn out. After this, the PC may turn off altogether, and it will be possible to turn it on again only after a long time and after going to the service center.

REFERENCE! In order to prevent such a terrible scenario, it is necessary to observe at least the most elementary rules. In this case, all the problems can be forgotten.

So, what needs to be done to successfully disperse a computer?

1. First, you should choose one of two methods. For overclocking, you can use either third-party programs downloaded on the Internet, or do it from BIOS. Those who do not know what BIOS is, it is better to go directly to the first option. In this case, the probability of PC failure will be significantly less.
2. Using third-party programs is extremely simple. To do this, you do not need to be a programmer or a great specialist in overclocking a computer, however, achieving outstanding results will also fail. In particular, in this case, you can count on very mediocre results. Typically, programs that are designed to overclock, do not allow you to increase the power of your computer by more than 30%. If you find programs created by novice programmers, then everything is possible there, but too much overclocking is a serious threat to the PC, so you should not risk it again.

If you try to disperse the computer from BIOS, then for a start you should go into it. To do this, press the key, which is mentioned on the computer boot screen. This is usually either F1 or Del. If during the download no messages appear on the screen, it is recommended that you study the instructions for the motherboard. It should contain the necessary information.

So, after the user managed to enter the BIOS, he needs to find the menu that is responsible for the processor and video cards. All manufacturers have different BIOSes, so you need to focus on the English notation Hz (Hz in Russian).

If everything went well, then you need to restart the computer. It is also worth remembering that if the device was overclocked, then in this case it is likely that the PC may overheat, so it is recommended to increase the intensity of the fans. In this case, it will be possible to improve the cooling of the computer, which may be very helpful.

When it comes to hertz computers, it most often means hertz of the central processor, since it is he who is the key component of any PC. The frequency of processors today can reach almost 4 Hz, but if we are talking about overclocked processors, then the frequency can be higher.

REFERENCE! To solve most domestic problems, 2-3 Hz is enough. It is also worth understanding that frequency is not the only characteristic of a CPU that affects performance.

The cache size and many other parameters also play a role, so you should not pay too much attention to the frequency only if it is not a gaming computer. In the case of games, everything changes dramatically. They need extremely powerful processors with high frequency. Only in this case, the games will not slow down and the gamer will be able to get the most out of the gameplay.

Gertsevka gaming PCs reaches 3-4 Hz. This is enough to solve the majority of the problem. If the frequency is less, then during the game so-called “lags”, that is, slowing down the “picture”, can be observed. This is very unpleasant. If the frequency is less, then the PC can be overclocked, as mentioned above in the text. Hertzivka is the most important indicator when it comes to gaming computers and PCs for working with graphics.