DIY TV elevator

Almost every modern apartment has a TV. Progress does not stand still, so the screens are getting bigger and bigger, which pleases someone, and upsets someone - there is also a need for more places for the location of such TV receivers. Some even have to refuse to purchase a more comfortable large screen in favor of a small one, so that the TV is not the only thing that catches your eye when entering the room. Is it possible to somehow solve this problem and enjoy the large image without spoiling the interior? Build an elevator!

Why do I need a lift for the TV

An elevator is a special design that fits in any piece of furniture - usually a cabinet, a small cupboard or any other rather wide thing. The bottom line is that you can hide the TV inside when it is not needed. To see your favorite programs again, it will be enough to press one button and the elevator will lift the unit back.

Thus, you can solve two problems at once: placing a large screen, for which it is sometimes simply impossible to find a place and maintain harmony in the interior. Some styles simply do not imply the presence of any modern devices, especially if they are as large as a TV. It may be that you just don’t like how the black screen looks on the background of pretty wallpapers and brightly colored furniture.

You can get rid of all this with just a simple design. It is quite possible to do it yourself without spending a lot of time and effort. If you are careful and accurate, even a beginner will be able to do everything right the first time.

How to make a do-it-yourself elevator for a tv receiver

First you need to decide on the size. This is the most important point, because the error will completely exclude the design. Then prepare the materials you need. They can be purchased at a specialized store or you can take some parts from an old waste cabinet.

Now you can get to work. First, cut a rectangular hole from the cabinet.

IMPORTANT! Make the hole wider and longer than the TV by a few centimeters. This will avoid troubles during operation - the device will not touch the walls.

Think about the need for a cover. If you need it, you can attach a sawn board and add a special spring so that it automatically opens when the elevator mechanism starts.

Now you need to fix the guides. Make sure they are placed in parallel. The connecting element between the TV and the guides will be the base - you can take a sheet of plywood or other suitable material. The next step is to secure the linear actuator. It is with its help that the mechanism is activated.

If necessary, strengthen it on several sides and take care of nutrition. Now all that remains is to attach a cable.

When the design is ready, you need to think about management. The easiest option will be an electronic relay. It can be purchased at the store and connected according to the instructions.

After connecting, check if everything works correctly. Now you can hide your TV in a cupboard or cabinet so that it does not spoil the interior, and also collects less dirt and dust!

Watch the video: Build a MOTORIZED monitor lift on a budget! (March 2024).

Leave Your Comment