Hiding a refrigerator in a cabinet (drawer) is a great solution for those who appreciate the designer beauty and practicality of the location of household appliances in the kitchen. Moreover, this manipulation can be done even if your unit for the cold is not made in the form factor of the refrigerator for embedding.
Is it possible to integrate a conventional refrigerator in a cupboard
If a situation arises when the unit for the cold cannot fit into the overall design of the kitchen, a special place (cabinet) will come to the aid where it can be placed so that it does not “touch” the gaze.
In our discussion, there are two types of refrigerators:
- intended for embedding;
- those that were not originally conceived for these purposes.
On a note! Regular refrigerator - can also be built into the cabinet.
For both options, you should only take into account some aspects, which will be discussed later.
Safety regulations:
- The back wall of the cabinet should not be pressed firmly against the heated elements of the refrigerator. The heat generated can start a negative interaction with paint or objects that are stuck between the walls. Such interaction is fraught with fire or damage to the technical characteristics of the cabinet.
- If possible, remove the refrigerator legs or discard the bottom of the drawer. In refrigerators that are designed for installation, legs may be present with the possibility of their non-use. In conventional units for cold, the legs are usually fixed, which increases the specific gravity pressure to the bottom of the cabinet. The correct location of this household appliance is the key to successful operation.
- The internal volume of the drawer must not be exposed to heat from a stove or other elements. Note that gas stoves can heat the refrigerator, even despite the partition from the cabinet. Place these items of household appliances at an appropriate distance from each other, as in the normal location.
Operating Rules:
- Inspect the back wall regularly for any cobwebs and debris. Clogging can become not only the cause of a fire, but also the cause of impaired thermoregulation, and as a result - failure of the compressor's cooling properties for freezing.
- Try not to put anything on top of the cabinet. This surface is not a place for things or a storehouse: firstly, they can harm the overall structure, and secondly, they increase the level of fire hazard.
- Do not allow sharp blows or physical interaction, which can move the household appliance for the cold from its place of installation. This rule applies to all household appliances without exception, even taking into account their special placements.
Advice! Never leave decorative magnets on the refrigerator door. Magnets can harm the operation of sensitive climate equipment inside the refrigerator (electronic thermometers that are installed in the door and others), and also look simply artless.
You can get rid of magnetic tapes or magnets, and then stick them on double-sided tape on the cabinet door.
Possible ideas: how to hide the refrigerator in a cupboard in the kitchen
The main idea is to pick up a drawer that would not look catchy and distinctive from the design of your kitchen.
A protruding handle for opening immediately catches your eye and gives out a "secret" that there is something behind the door. It is recommended to use special invisible handles. They are almost imperceptible and practical to use, which will add more adaptability to your kitchen.
If you have enough space, you can use soundproof materials (they require more space) for upholstery of the cabinet structure, which will significantly reduce the overall noise level.
You can install special lighting with a battery inside the box, which will allow you to comfortably take food from the refrigerator, even if you have problems with the power supply (the light went out).
What you need to build a refrigerator in the cabinet
Access to the power grid. PThe first thing you need is to solve the problem with wiring and free access to the outlet in advance. Buy an extension cord with a supply of wire, which will allow for future shifts.
Physical strength to produce the installation process. It is better to share this task with a partner (or even with a large number of workers). Pre-defrost the refrigerator better, which will reduce its total weight. Lifting heavy household appliances is better with jacks.
How to hide a refrigerator in a cabinet with your own hands
During the installation process, it is better to protect the flooring with a hard cloth, which will protect your floors from scratches and other mechanical damage.
For the exact location of the cooling unit housing, use construction belts. With their help, you can install at the planned location.
For greater comfort during installation, you can remove the cabinet door, which allows you not to worry about the possibility of causing mechanical damage to it, and then simply screw it into place.
Leave Your Comment