To save money and enjoy the process, you can design your own furniture. It will not take much time, nor will it take much effort and special skills, knowledge. On the contrary, you can make a structure that will please you, take into account personal preferences.
However, before starting the manipulation you need to identify the main points that contribute to a productive process.
Choosing a scheme for creating a sofa
First you need to decide which model of plywood sofa you will create with your own hands. Below are options for the various devices that may exist. Since the samples were tested by many masters, you can safely use the indicated parameters.
It is worth remembering that if you are going to change them to your desires, then changing one indicator, you must do the same in proportions with others.
Preparation of plywood and other materials and tools
For a construction without sharp edges, a product is required so that it can withstand a certain load. Furniture shields or thick plywood are perfect for this. As for the curly details, for this it is better to choose fiberboard, which in the future should be specially strengthened with boards.
To perform a model that differs in angular shape, it is worthwhile to purchase wooden plates, plywood, planks, synthetic winterizer and fabric. Also need bars, fiberboard sheet. As for the tools, these are:
- Self-tapping screws and nails.
- Corner plates.
- Stapler.
- Drill.
- Hinges.
How to assemble a rounded sofa, corner design, sofa book
After the preparation is fully completed, you can proceed to the main part.
- The frame of the rounded sofa is a panel of three layers, and the back is also made. After which it is necessary to impose foam rubber, and not from one grade, but from four. They should vary both in softness and density, and in thickness. It is necessary to stick cotton on them, namely, 100 grams per square meter. You should not forget about the cover, which will need to fit the entire structure. For complete convenience, provide the product with pillows and legs;
- For an angular structure, the first thing to do is create a seat, for which you will need to fasten the boards (their width = 20 cm). A plate is used as a bottom. Then you can proceed to the frame: the main part is sheet material, the back is fabric. The same manipulations must be performed for the upper seat. The entire structure must be overlaid with foam rubber and synthetic winterizer. The foundation is ready. Now the corner part: it can be made from sheet products, and then also pasted with batting. The final point is the manufacture of supports and equipping the product with a cover. First, they need to make holes;
- Using the bars, you should make a box by connecting them as shown in the diagram. Fiberboard should be attached to the product. Next, you need to create rectangular parts from the bars, which are subsequently connected. Lamellas are attached to them. From the chipboard sheet, it is necessary to cut the side walls, having previously cut holes for them. After that, you need to collect all the elements. To do this, it is worth purchasing individual mechanisms sold in stores. They need to be fixed between the back and the seat. Then they perform the standard procedure: they cover everything with foam rubber and put on a cover.
Leave Your Comment